LET Security Shield
Build The Future With Precision Workmanship
Flexitank is a soft packaging container made of polyethylene (PE) and polypropylene (PP) that can store and transport various non-hazardous fluids. Each set of flexitanks can be placed exactly in a 20-foot container, with a volume of 15m³-26m³. In the transportation of non-hazardous liquid materials, it can replace expensive traditional packaging such as oil tankers and iron drums. It takes about 20 minutes to install a set of flexitanks. After the installation is completed, you only need to connect the valve and the feed port to load materials. After the loading is completed, the fully loaded container can be transported on roads, railways, and freighters for medium and long distances.
Features
Low purchase cost, high load capacity, light weight and small size of the product.
Effectively reduce costs (including packaging, barreling, storage, processing and material management costs), only need to pay one-way freight, reduce transportation costs, no cleaning costs, eliminate the risk of cross-contamination of goods.
Easy operation, reliable quality, environmentally friendly products, simplified loading and unloading procedures, reducing loading and unloading workload, and effectively improving work efficiency.
Product Advantages
Abundant supporting resources: Containers are widely distributed in railways, ports, and highway freight yards. The quantities are huge and can be called at any time. However, the number of tank containers or tank trucks is relatively small and requires deployment, leaving little room for choice.
1
Hygienic and pollution-free: The flexitank is a disposable product and is made of imported food-grade raw materials. It does not cause secondary pollution to the liquid contained and can effectively maintain product quality.
2
Convenient transportation: The use of flexitank containers for transportation facilitates the implementation of rapid intermodal transportation by road, rail, and sea, and a door-to-door one-stop transportation mode, which greatly improves transportation efficiency.
3
Cost savings: Disposable products save cleaning, maintenance and other costs, and greatly save manpower and financial resources during the loading and unloading process.
4
Compare With Similar Products
Oil drum (steel/plastic)
High procurement costs
high labor costs
Time-consuming loading and unloading
Low space utilization
And difficult post-processing
IBC
Low versatility
High procurement costs
Cumbersome cargo transfer process
Need for auxiliary equipment such as forklifts
Time-consuming loading and unloading
Standard Tank container
Not very versatile
Expensive to rent
Expensive to clean
Long to deploy
And cumbersome to transfer goods
Chemical carriers
Not very versatile
Long deployment cycle
Requires huge transportation volume
Only port to port
And difficult post-processing
Number of units
Unit capacity
Total capacity
Loading time
Unloading time
Manpower occupation
Space usage
Packing cost
Container Flexitank
1PCS
23,000L
23,000L
1H
30MIN
2PP
Low
￥2000
Oil drum
80PCS
200L
16,000L
2H
3H
3PP
Hige
￥130×80=￥10400
IBC
20PCS
1,000L
20,000L
2H
3H
3PP
Middle
￥600×20=￥12000
Choose Container Standards
| Container | Manufactured in strict accordance with international standards, including design, size, load-bearing, testing, identification, marking and operation requirements, etc. should all comply with international standards. | |
| Scope of application | Suitable for road and sea transport. | |
| Container age | 20-foot standard container not older than 3 years. | |
| Appearance | Exterior panels without any repairs. | |
| Vertical groove | There is a vertical groove next to the door bolt on each side of the container. | |
| Bar lock | The left and right doors of the container each have intact locks. | |
| Label | There is no mark or label with the word "danger" on the box, and it does not contain any radioactive or toxic substances that are dangerous to the human body. | |
| Inside the container | The container must be clean and dry, free of odor, and free of any debris, sharp edges, spikes, loose screws, pits, floor cracks, loose and raised floor nails, welding spots in the container or the inner surface of the container that may cause damage to the flexitank. Any obvious traces of welding repairs, etc. | |
| Floor | There should be no cross-contamination or other sources of contamination in the container or on the floor that may react with the flexitank material and leak into the liquid cargo. | |
| Tips | There is a flexitank operation instruction manual in the accessory package, which contains three parts: "Flexitank Installation Checklist", "Service Tracking Sheet" and "Flexitank Installation Process". The installation personnel are required to strictly follow the relevant contents of the instruction manual. |
LET has been focusing on the research and development, design and customized production of high-end food-grade liquid bag special films. Relying on the technical support of major polyethylene raw material suppliers in the world, LET has established long-term technical and strategic cooperation relationships with them, and has many technical experts in the liquid bag and blown film industries, with an annual production capacity of 6,000 Ton. The high-end liquid bag special films produced by it are at the leading level in the industry in terms of various physical indicators (tensile strength, elongation at break, dart impact strength, thickness uniformity, rub resistance, etc.).
