Electric Heating Pad AND Steam Heating Pad

Electric Heating Pad

The electric heating pad is an industrial flexible electric heating product that is placed at the bottom of an IBC tote or container. It is used to heat liquid plastic bags or cover 

the heated liquid during the later stages of transporting oil liquid cargo.

In order to achieve the effect of anti-freezing and thawing, such as the thawing of palm oil. The heating pads developed and produced by Lide Flexitank can be customized 

in different specifications and sizes according to needs, suitable for use in different containers, such as: four-corner ton boxes and octagonal ton boxes.

The size of the box is 900*900mm, and the size of the container for flexitank transportation is 1200*5700mm. The surface of the heating pad is made of 0.05mm aluminum foil, 

and the back is protected by insulation carpet or 0.05mm aluminum foil.It has the characteristics of fast thermal conductivity, uniform heating surface, and neat and beautiful appearance. The heating pad is used to convert the product from a solid or

semi-solid state into a liquid state, so as to facilitate unloading and make the liquid state

Products can also be transported using flexitanks in low-temperature weather without being affected.

Features:

Strong thermal conductivity: The aluminum foil surface has fast thermal conductivity, high temperature resistance, and even heating surface

Good insulation: using fluoroplastic heating wire, high heating efficiency and good insulation performance

Good thermal insulation effect: sustainable heating, safe and reliable, easy to maintain

Wide application: strong environmental adaptability, can be used in IBCs or containers of different specifications

Tailor-made: The heating pad can be customized according to the required size, power, plug and other specifications and models.

Long service life: can be reused, must be inspected and repaired before reuse

Applicable products: fats, paper additives, polyethers, palm oil and other fats, syrups, waste cooking oil, etc.

Steam Heating Pad

The steam heating pad is a new type of product that provides heating for container flexitanks. It is laid under the flexitank and uses waste steam generated in the production plant for heating. The air outlet is connected to the air inlet pipe of the heating pad to pass the steam. It circulates and heats hot water from the bottom upward, so that the product inside the flexitank absorbs a certain amount of steam heat energy and converts it from a solid or semi-solid state into a liquid state, thereby solving the unloading problem at the destination port.

 The emergence of steam heating pads solves the problem of using flexitanks affected by low-temperature weather. It is reusable and the size is suitable for container flexitanks. Heating pads with different tube numbers can be customized according to needs. The heating pads are simple to operate, economical and environmentally friendly, and can Reuse, must be inspected and repaired before reuse to ensure safe use.

Features:

High temperature resistance: Using high temperature resistant rubber tube, it is not easy to deform and the heating surface is even

Good air tightness: the rubber pipe joints are tightly connected and reliable to prevent leakage of the heating pad

Long service life: can be reused, must be inspected and repaired before reuse

Cost savings: Waste steam generated during production at the unloading plant can be reused in the heating pads without any additional heating costs

Good thermal insulation effect: sustainable heating, safe and reliable, easy to maintain

Easy to operate: As long as there is steam, you can connect the pipe of the heating pad for heating

Applicable products: fats, paper additives, polyethers, palm oil and other fats, syrups, waste cooking oil, etc.